System information

Function

Guide profiles arranged around the circumference form the basis of the web guiding. In the basic version, the guide profiles are fixed to a guide plate so that they can be adjusted to the side via an actuating drive. In the case of segmented guide profiles, both guide plates are connected with a push rod and adjusted synchronously via an actuating drive. This means that, in addition to the web guiding function, the system also acts as a spreader on the textile web.

Area of use

Due to the minimal stress applied to the material by the segmented roller guider, the ELSMART system for web guiding and spreading can be used in almost all textile production processes. The prerequisite here is that the textile web does not display surface stability.

Application

Segmented roller guiders can be used freely in terms of position. Wrapping of 90° is always required. The infeed path should be at least one web width. By contrast, the exit should be kept as short as possible. Rolled-in edges can be rolled out in the infeed plane with the aid of an additional selvedge opening device.

ELSMART

Legend

A-A = Web tension distribution in the control section | B-B = Web tension distribution at outfeed | K = Correction of the web guiding | a = Wrapping angle 90° | F1 = Basic web tension at infeed | F2 = Web tension at the outfeed | AB = Operating width | 1 = Swivel axis | 2 = Infeed roller/road | 3 = Segment control roller | 4 = Sensor | 5 = Locking roller | L1 = Infeed path | L2 = Outfeed path

Web guiding systems

Segmented roller guider system ELSMART SWS91

Web guiding for woven and knitted fabrics in dry and damp operation or for rubber webs out of the loop at a machine speed of 50 m/min with electric actuating drive

More info

Web guiding and spreading system ELSMART SWS94

Precise web guiding for woven and knitted fabrics in dry and damp operation at a machine speed of up to 200 m/min with electric actuating drive

More info

Web guiding and spreading system ELSMART SWA95

Precise web guiding for woven and knitted fabrics in dry and damp operation at a machine speed of up to 130 m/min with pneumatic actuating drive

More info

Web guiding and spreading system ELSMART SWS95

Precise web guiding for woven and knitted fabrics in dry and damp operation at a machine speed of up to 220 m/min with electric actuating drive

More info

Segmented roller guider system ELSMART SWS96

Web guiding in stainless steel design for woven and knitted fabrics in wet and dry operation at a machine speed of up to 100 m/min with electric actuating drive

More info

Web guiding and spreading system ELSMART SWS97

Precise web guiding in stainless steel design for woven and knitted fabrics in steam and wet operation up to 100°C at a machine speed of up to 100 m/min

More info

Wet spreading system LG 05

Used for smoothing out longitudinal creases and rolled-up edges on moving textile webs

More info

Spreading system for dry and damp LG 06

Compact spreading system for crease-free spreading and selvedge opening on dry to wet woven and knitted fabrics

More info

System components

Infrared wide band sensor FE 45

Digital infrared wide band sensor for web center detection, web edge detection, and width measurement with a tube distance (clear width) of 80 mm

More info

Infrared edge sensor FR 52

Infrared edge sensor based on the principle of retroreflection with a field of view of ±10 mm and a resolution of 0.02 mm

More info

Infrared wide band sensor FE 46

Digital infrared wide band sensor for web center detection, web edge detection, and width measurement with a tube distance (clear width) of 160 mm

More info

Contact

Write to us! We are looking forward to your message.

Salutation
*Required field